Christopher Ward
Christopher Ward C60 Trident 42 Strap Size — 22mm Lug Width
The Christopher Ward C60 Trident 42 has a 22mm lug width, so it takes a 22mm watch strap.
Lug width22mm
| Lug width | 22 mm |
|---|---|
| Case size | 42 mm |
| Lug-to-lug | 49 mm |
| Thickness | 12.3 mm |
| Spring bar Ø (typical) | 2.0 mm |
| End type | Fitted ends best |
Strap styles that fit
- NATO / Zulu22mm fits if the strap's thickness clears the case under the bars.
- PerlonWoven pass-through, 22mm.
- 2-piece leatherStraight ends fit; curved ends for a gapless look.
- Rubber / siliconeDivers & sports fit well.
- Milanese / meshStraight-end 22mm mesh fits.
- Metal braceletNeeds 22mm end-links shaped for this case.
▲ Check your generation: older 42mm Trident Pro models are 22mm, while the 40mm Pro 600 is 20mm.
Fit & sizing notes for the C60 Trident 42
- Width: buy 22mm straps. Tapered straps listed as 22/20mm or 22/18mm fit too; only the first number has to match. See strap sizes explained.
- Spring bars: 22mm long, about 2.0mm diameter (spring bar sizes).
- Ends: the case curves between the lugs, so curved or fitted-end straps close the gap. Straight-end straps still fit.
- Wrist fit: at 49mm lug-to-lug it should sit within the top of wrists from about 16.3cm up (rule of thumb: lug-to-lug under ~30% of wrist size). That's longer than 81% of the watches in our index. See what size watch suits your wrist.
- Strap thickness: at 12.3mm thick it's mid-thickness, so most straps suit it; padded leather and NATOs both balance well.
Sources & corrections
Lug width from widely published specifications. Case sizes and references vary, so measure your own watch if anything looks different.
Spec wrong for your watch? Send us a correction with your reference number.
Get the right strap
Links open Amazon — we may earn a commission at no cost to you.
Christopher Ward C60 Trident 42 — strap questions
What size strap does the C60 Trident 42 take?
The Christopher Ward C60 Trident 42 has a 22mm lug width, so you need a 22mm watch strap.
Will any 22mm strap fit the C60 Trident 42?
Most will. Width is the main thing to match, but also check that the strap's spring-bar holes suit the bars, and that the strap is thin enough to clear the case between the lugs. For a gapless look, pick curved/fitted ends. A metal bracelet needs 22mm end-links made for this model.
What spring bar size does the C60 Trident 42 use?
22mm long and about 2.0mm in diameter (a typical figure; measure the original bar to be sure).
Is the C60 Trident 42 good for strap swapping?
Yes. With standard 22mm spring-bar lugs, NATO, leather, rubber and mesh straps can all be fitted with a spring-bar tool.