◷ STRAP INDEX

Rolex

Rolex Submariner Strap Size — 21mm Lug Width

The current 41mm Rolex Submariner (124060, 126610LN/LV) has a 21mm lug width. Earlier 40mm Submariners (114060, 116610 and older) take a 20mm strap.

Lug width21mm
Lug width21 mm
Case size41 mm
Lug-to-lug48 mm
Thickness12.5 mm
Spring bar Ø (typical)2.0 mm
End typeFitted ends best

Which reference do you have?

Similar-looking models can take different straps. Your reference number is on the case back or your papers.

ModelCaseStrap
124060, 126610LN, 126610LV41mm, 2020 on21mm
114060, 116610LN, 116610LV40mm, c. 2010–202020mm
14060M, 16610 and earlier40mm20mm

Strap styles that fit

  • NATO / Zulu21mm fits if the strap's thickness clears the case under the bars.
  • PerlonWoven pass-through, 21mm.
  • 2-piece leatherStraight ends fit; curved ends for a gapless look.
  • Rubber / siliconeDivers & sports fit well.
  • Milanese / meshStraight-end 21mm mesh fits.
  • Metal braceletNeeds 21mm end-links shaped for this case.

▲ The 41mm Submariner (2020 on) is 21mm; earlier 40mm Submariners are 20mm.

Fit & sizing notes for the Submariner

21mm lug width41mm case48mmlug-to-lug
  • Width: buy 21mm straps. Tapered straps listed as 21/19mm or 21/17mm fit too; only the first number has to match. See strap sizes explained.
  • Spring bars: 21mm long, about 2.0mm diameter (spring bar sizes).
  • Odd size: 21mm straps are harder to find; a 20mm strap fits with a small gap, but never go wider. Odd lug width options.
  • Ends: the case curves between the lugs, so curved or fitted-end straps close the gap. Straight-end straps still fit.
  • Wrist fit: at 48mm lug-to-lug it should sit within the top of wrists from about 16.0cm up (rule of thumb: lug-to-lug under ~30% of wrist size). That's longer than 62% of the watches in our index. See what size watch suits your wrist.
  • Strap thickness: at 12.5mm thick it's mid-thickness, so most straps suit it; padded leather and NATOs both balance well.

Rolex widened the Submariner's lugs from 20mm to 21mm when the 41mm case arrived in 2020, mainly to carry a broader Oyster bracelet. Straps sold as “for Submariner” can be cut for either generation, so check the listing names your reference. Bracelets and fitted rubber straps are generation-specific. A 20mm strap on the 21mm watch leaves about 0.5mm each side.

Sources & corrections

Correction, 24 October 2026: This page previously listed 20mm for the current 41mm Submariner. The 41mm references are 21mm; 20mm applies to the earlier 40mm generation.

Lug width checked against: Everest Bands: Rolex sizes, cases and lugs; Jaztime: Submariner 124060 review. Last checked 24 October 2026.

Spec wrong for your watch? Send us a correction with your reference number.

Get the right strap

Links open Amazon — we may earn a commission at no cost to you.

Rolex Submariner — strap questions

What size strap does the Submariner take?
The current 41mm Rolex Submariner (124060, 126610LN/LV) has a 21mm lug width. Earlier 40mm Submariners (114060, 116610 and older) take a 20mm strap.
Will any 21mm strap fit the Submariner?
Most will. Width is the main thing to match, but also check that the strap's spring-bar holes suit the bars, and that the strap is thin enough to clear the case between the lugs. For a gapless look, pick curved/fitted ends. A metal bracelet needs 21mm end-links made for this model.
What spring bar size does the Submariner use?
21mm long and about 2.0mm in diameter (a typical figure; measure the original bar to be sure).
Is the Submariner good for strap swapping?
Yes. With standard 21mm spring-bar lugs, NATO, leather, rubber and mesh straps can all be fitted with a spring-bar tool.