Tudor
Tudor Black Bay 58 Strap Size — 20mm Lug Width
The Tudor Black Bay 58 has a 20mm lug width, so it takes a 20mm watch strap.
Lug width20mm
| Lug width | 20 mm |
|---|---|
| Case size | 39 mm |
| Lug-to-lug | 47.5 mm |
| Thickness | 11.9 mm |
| Spring bar Ø (typical) | 2.5 mm |
| End type | Straight |
Which reference do you have?
Similar-looking models can take different straps. Your reference number is on the case back or your papers.
| Model | Case | Strap |
|---|---|---|
| 79030 (Black Bay 58) | 39mm | 20mm |
| Black Bay 41 (79230) | 41mm | 22mm |
| Black Bay 54 (79000N) | 37mm | 20mm |
Strap styles that fit
- NATO / Zulu20mm fits if the strap's thickness clears the case under the bars.
- PerlonWoven pass-through, 20mm.
- 2-piece leatherStraight ends fit flush.
- Rubber / siliconePick straps with holes made for fat bars.
- Milanese / meshStraight-end 20mm mesh fits.
- Metal braceletNeeds 20mm end-links shaped for this case.
▲ BB58 = 20mm (larger Black Bays are 22mm).
Fit & sizing notes for the Black Bay 58
- Width: buy 20mm straps. Tapered straps listed as 20/18mm or 20/16mm fit too; only the first number has to match. See strap sizes explained.
- Spring bars: 20mm long, about 2.5mm diameter. These are fat bars, so pick straps with holes made for them, or swap to thinner 20mm bars for slim leather (spring bar sizes).
- Wrist fit: at 47.5mm lug-to-lug it should sit within the top of wrists from about 15.8cm up (rule of thumb: lug-to-lug under ~30% of wrist size). That's longer than 55% of the watches in our index. See what size watch suits your wrist.
- Strap thickness: at 11.9mm thick it's mid-thickness, so most straps suit it; padded leather and NATOs both balance well.
Sources & corrections
Lug width from widely published specifications. Case sizes and references vary, so measure your own watch if anything looks different.
Spec wrong for your watch? Send us a correction with your reference number.
Get the right strap
Links open Amazon — we may earn a commission at no cost to you.
Tudor Black Bay 58 — strap questions
What size strap does the Black Bay 58 take?
The Tudor Black Bay 58 has a 20mm lug width, so you need a 20mm watch strap.
Will any 20mm strap fit the Black Bay 58?
Most will. Width is the main thing to match, but also check that the strap's spring-bar holes suit the bars, and that the strap is thin enough to clear the case between the lugs. A metal bracelet needs 20mm end-links made for this model.
What spring bar size does the Black Bay 58 use?
20mm long and about 2.5mm in diameter (a typical figure; measure the original bar to be sure). These are thicker 'fat' bars, so heavier straps suit it best.
Is the Black Bay 58 good for strap swapping?
Yes. With standard 20mm spring-bar lugs, NATO, leather, rubber and mesh straps can all be fitted with a spring-bar tool.