Vostok
Vostok Amphibia 710 Strap Size — 18mm Lug Width
The Vostok Amphibia 710 has a 18mm lug width, so it takes a 18mm watch strap.
Lug width18mm
| Lug width | 18 mm |
|---|---|
| Case size | 40 mm |
| Lug-to-lug | 45 mm |
| Thickness | 13 mm |
| Spring bar Ø (typical) | 1.8 mm |
| End type | Straight |
Strap styles that fit
- NATO / Zulu18mm fits if the strap's thickness clears the case under the bars.
- PerlonWoven pass-through, 18mm.
- 2-piece leatherStraight ends fit flush.
- Rubber / siliconeDivers & sports fit well.
- Milanese / meshStraight-end 18mm mesh fits.
- Metal braceletNeeds 18mm end-links shaped for this case.
▲ Lug size varies by case; classic 710 = 18mm.
Fit & sizing notes for the Amphibia 710
- Width: buy 18mm straps. Tapered straps listed as 18/16mm or 18/14mm fit too; only the first number has to match. See strap sizes explained.
- Spring bars: 18mm long, about 1.8mm diameter (spring bar sizes).
- Wrist fit: at 45mm lug-to-lug it should sit within the top of wrists from about 15.0cm up (rule of thumb: lug-to-lug under ~30% of wrist size). That's longer than 16% of the watches in our index. See what size watch suits your wrist.
- Strap thickness: at 13mm thick it's a chunky case: thicker padded leather, rubber/FKM or a heavier NATO balance it visually; very thin straps can look undersized.
Sources & corrections
Lug width from widely published specifications. Case sizes and references vary, so measure your own watch if anything looks different.
Spec wrong for your watch? Send us a correction with your reference number.
Get the right strap
Links open Amazon — we may earn a commission at no cost to you.
Vostok Amphibia 710 — strap questions
What size strap does the Amphibia 710 take?
The Vostok Amphibia 710 has a 18mm lug width, so you need a 18mm watch strap.
Will any 18mm strap fit the Amphibia 710?
Most will. Width is the main thing to match, but also check that the strap's spring-bar holes suit the bars, and that the strap is thin enough to clear the case between the lugs. A metal bracelet needs 18mm end-links made for this model.
What spring bar size does the Amphibia 710 use?
18mm long and about 1.8mm in diameter (a typical figure; measure the original bar to be sure).
Is the Amphibia 710 good for strap swapping?
Yes. With standard 18mm spring-bar lugs, NATO, leather, rubber and mesh straps can all be fitted with a spring-bar tool.